Skip to main content
Behfar Building

Floor Sanding & Refinishing in Toronto & the GTA

Sanding, staining, oiling and lacquering existing hardwood.

An empty room with wood floors and green walls

Photo by Alex Tyson on Unsplash

Get an estimate for your floor sanding & refinishing

Takes about 2 minutes

Free in-person consultation and estimate

We come to the property in person, look at the work and give you an estimate at no cost and no obligation.

Step 1 of 7 · Question 1 of 1

What do the floors need? (required)

A real person responds within 24 hours.

What’s included

This is the work itself, item by item. If your job does not need one of these, it is not on your estimate.

  • Assessment of the existing floor

    We check thickness and past sandings to confirm the floor can take another one.

  • Repairs before sanding

    Loose boards secured, damaged boards replaced and gaps filled.

  • Dust-controlled sanding

    Sanded through the grits with vacuum extraction, so the house is liveable.

  • Edging and corners

    Perimeters and corners worked to match the field rather than left as a visible ring.

  • Staining

    Stain applied evenly to a sample you have approved on your own floor.

  • Finish coats

    Water-based or oil finish, or hardwax oil, applied in the coats the product requires.

  • Screening between coats

    Abraded between coats so the final surface is smooth rather than gritty.

  • Curing guidance

    Clear instructions on when you can walk on it, move furniture back and lay rugs.

How it runs

Every job we take on follows the same sequence, from the first call to the walkthrough.

  1. Tell us about the floor

    Species if you know it, area, age, and what it looks like now.

  2. We call you back

    Within 24 hours, to check whether it has enough left to sand.

  3. Site visit and written estimate

    We look at the boards and the wear, and quote the scope in writing.

  4. Stain and finish samples

    Samples prepared on your own floor so the colour is not a surprise.

  5. Preparation and repairs

    Room cleared, openings sealed, and boards repaired or replaced.

  6. Sanding and finishing

    Sanded through the grits, stained if chosen, then finish coats applied.

  7. Curing and walkthrough

    We tell you exactly when to return, then walk the finished floor with you.

That is the whole job. Tell us about yours and we will price it — a real person calls you back within 24 hours.

Get a free estimate

Any permits a project requires are arranged for that project and shown to you before work starts.

Where we work

Based in Newmarket. Working across Toronto, York Region, Simcoe and Durham.

Tell us about your project

Two minutes. A real person calls you back within 24 hours.

Call 647-394-5886